Dave

Dave

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Solutions Series Electric Conveyor Dryer

Click here for mfg specifications.

To request a quote, please send email to: This email address is being protected from spambots. You need JavaScript enabled to view it..  

The VOLT by Anatol is the only professional-grade electric automatic screen printing machine in the world.  It gives you the speed, power and reliability of a scren printing press without the issues of a compressor or chiller.  The volt uses reliable servo-driven indesers and servo lift to ensure years of reliable service without downime caused by leaks in tubing and the build-up of dirt and moisture.  Anatol's VOLT is energy-efficient, capable of cutting your electric bill when compared to pneumatic automatic screen printing machines.

It's designed for maximum ease of use with a 25" touchscreen interface, one touch digital off-contact controls, tool-less stroke and micro registration adjustments, laser alignment system and Speed Clamps screen locks.  Anatol offers VOLTs to benefit shops of all sizes with four models: VOLT S, VOLT M, VOLT L and VOLT XL, in configurations of 6 stations/4 colors to 20 stations/18 colors.

Click here for mfg specifications.

To request a quote, please send email to: This email address is being protected from spambots. You need JavaScript enabled to view it..  

Used dryer manufactured by Vastex.   

Less than 2 years old.

Available in Massachusetts.

Click here for mfg specifications.

Asking $3,000.

If interested, please send email to: This email address is being protected from spambots. You need JavaScript enabled to view it..  

Used Douthitt Direct Method Screenmaker - Light Table avalable.

Features:

  • Automated Start and Cancel
  • Easy Loading Height
  • Guaranteed Coverage 

Click here for vendor specifications:  Douthitt DMZ specs

Located in New England asking $5,500.00

If interested, please send email to: This email address is being protected from spambots. You need JavaScript enabled to view it..    

All inquiries will be responded to quickly.

 

Check out these two reclaim techniques.  

Applications:

  • Direct printing
  • White or light colored garments
  • 100% Cotton garments
  • Cotton/Polyester, Acrylic & Polyester garments (with LB underlay)

Features:

  • Low build-up
  • Easily releases from the screen
  • Very soft hand

 Non-Phthalate Plastisol (Midori Series)

  • All Purpose (AP) inks are formulated to be directly printed onto white or light colored, 100% cotton garments. AP inks can also be used on dark colored garments if an underlay is used; this is the suggested method for dark colored shirts to achieve a soft hand.
  • Bleed Resistance: None
  • Opacity: Low to Medium
  • Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
  • Mesh: 110-305 (43 to 120 threads per cm)
  • Stencil: Any direct emulsion or capillary film.
  • Wet on Wet Printing: Can be printed wet-on-wet to increase production.
  • Modifications: To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base (I10-1020), puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff or dulling use Suede Additive (I10-9907).
  • Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
  • Flashing: 700ºF for 3-5 seconds, just enough for the surface to be tack free.Squeegee Blade: Sharp.
  • Fusion/Curing: 270 F/132 C to 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
  • Wash-up: Any plastisol cleaner.
  • Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off ona white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and alwaystest on fabric to be printed.

Applications:

  • Direct printing -Great body
  • Medium to dark colored garments -Made with non-migrating pigments
  • 100% Cotton garments
  • Cotton/polyester, 100% polyester & Nylon garments

Features:

  • Great body
  • Made with non-migrating pigments
  • Maintains viscosity during runs
  • High opacity for great coverage

Non-Phthalate Plastisol (Midori Series)

  • Low Bleed (LB) inks are formulated to be directly printed onto medium to dark colored, cotton/polyester blends,100% polyester & nylon garments. These inks provide great coverage and have a creamy body unlike most bleed resistant inks, therefore making the ease of printing more simple. Please note that tightly woven nylon garments will require a nylon additive for adhesion.
  • Bleed Resistance: Great
  • Opacity: High
  • Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
  • Mesh: 86-160 (34 to 62 threads per cm)
  • Stencil: Any direct emulsion or capillary film.
  • Wet on Wet Printing: Can be printed wet-on-wet to increase production.
  • Modifications: To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base (I10-1020), puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff or dulling use Suede Additive (I10-9907).
  • Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
  • Flashing: 700ºF for 9 seconds, just enough for the surface to be tack free.Squeegee Blade: Sharp.
  • Fusion/Curing:  260F/127C to 325F/163C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
  • Wash-up: Any plastisol cleaner.
  • Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed.

High Opacity (HO) Series Ink 

Applications:

  • Direct printing
  • Medium to dark colored garments
  • 100% Cotton garments
  • Cotton/Polyester, Acrylic & Polyester garments (with LB underlay)

Features:

  • Low build-up
  • Easily releases from the screen
  • Very soft hand
  • High opacity for great coverage

Non-Phthalate Plastisol Inks (Midori Series)

  • High Opacity (HO) inks are formulated to be directly printed onto medium to dark colored, 100% cotton garments. These inks provide great coverage and have a creamy body unlike most High Opacity inks, therefore making the ease of printing more simple.
  • Bleed Resistance: High
  • Opacity: High
  • Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
  • Mesh: 86-240 (34 to 110 threads per cm)
  • Stencil: Any direct emulsion or capillary film.
  • Wet on Wet Printing: Can be printed wet-on-wet to increase production.
  • Modifications: To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base (I10-1020), puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff or dulling use Suede Additive (I10-9907).
  • Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
  • Flashing: 700ºF for 9 seconds, just enough for the surface to be tack free.
  • Squeegee Blade: Sharp.
  • Fusion/Curing: 270 F / 132 C to 325 F/160 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
  • Wash-up: Any plastisol cleaner.
  • Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed.

Visit the Quality Screen Supply "New” menu item and "Coupons" to learn about special money saving offers for during checkout, new products, and other promotions.  

Page 1 of 2