Flex Matches

Color matches for popular Wilflex colors.

Fusion/Curing: 270ºF/132ºC-325ºF/163ºC for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased.

3.5 Gallon Pail

5 Gallon Pail

$89.41 each No stock, pre-order available

Bears Flex Navy - 1 Gallon

HO Color Match for: 66100PFX EPIC BEARS NAVY

$145.54 each 1 item in stock

Brandywine Flex Red - 1 Gallon

HO Color Match for: 66100PFX EPIC BRANDYWINE

$107.48 each 1 item in stock

Contact Flex Blue - 1 Gallon

HO Color Match for: 60650PFX EPIC CONTACT BLUE

$90.32 each No stock, pre-order available

Dallas Flex Green - 1 Gallon

HO Color Match for: 70500PFX EPIC DALLAS GREEN

$103.22 each No stock, pre-order available

Dark Flex Gray - 1 Gallon

HO Color Match for: 14600PFX EPIC DARK GRAY

$117.76 each 1 item in stock

Dolphin Flex Orange - 1 Gallon

HO Color Match for: 30400PFX EPIC DOLPHIN ORANGE

$99.92 each 1 item in stock

Flex Scarlet - 1 Gallon

HO Color Match for: 40000PFX EPIC SCARLET RED

$88.40 each 3 items in stock

Kelly Flex Green - 1 Gallon

HO Color Match for: 70000PFX EPIC KELLY GREEN

$91.89 each 2 items in stock

Lemon Flex Yellow - 1 Gallon

HO Color Match for: 81000PFX EPIC LEMON YELLOW

$89.41 each 1 item in stock

Light Flex Royal - 1 Gallon

HO Color Match for: 62100PFX EPIC LIGHT ROYAL

$122.25 each No stock, pre-order available

National Flex Red - 1 Gallon

HO Color Match for: 62100PFX EPIC NATIONAL RED

$90.32 each No stock, pre-order available

Russell Flex Gray - 1 Gallon

HO Color Match for: 13300PFX EPIC RUSSELL GRAY

$108.13 each 1 item in stock

Russell Flex Purple - 1 Gallon

HO Color Match for: 50200PFX EPIC PURPLE

$90.34 each 1 item in stock

Spice Flex Brown - 1 Gallon

HO Color Match for: 23800PFX EPIC SPICE BROWN

$107.48 each 2 items in stock

Winter Flex Blue - 1 Gallon

HO Color Match for: WINTER FLEX BLUE

Textile Ink

Low Bleed POLY

WM Plastics Catalog
Written by Dave

Full catalog.

Written on Thursday, 12 October 2023 00:01 in WM Plastics
Ink_tech_catalog NP Version 40.pdf
Be the first to comment! Read 39 times
Low Bleed Colors
Written by Dave
Applications:
- Direct printing -Great body
- Medium to dark colored garments -Made with non-migrating pigments
- 100% Cotton garments
- Cotton/polyester, 100% polyester & Nylon garments
Features:
- Great body
- Made with non-migrating pigments
- Maintains viscosity during runs
- High opacity for great coverage
Non-Phthalate Plastisol (Midori Series)
- Low Bleed (LB) inks are formulated to be directly printed onto medium to dark colored, cotton/polyester blends,100% polyester & nylon garments. These inks provide great coverage and have a creamy body unlike most bleed resistant inks, therefore making the ease of printing more simple. Please note that tightly woven nylon garments will require a nylon additive for adhesion.
- Bleed Resistance: Great
- Opacity: High
- Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
- Mesh: 86-160 (34 to 62 threads per cm)
- Stencil: Any direct emulsion or capillary film.
- Wet on Wet Printing: Can be printed wet-on-wet to increase production.
- Modifications: To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base (I10-1020), puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff or dulling use Suede Additive (I10-9907).
- Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
- Flashing: 700ºF for 9 seconds, just enough for the surface to be tack free.Squeegee Blade: Sharp.
- Fusion/Curing: 260F/127C to 325F/163C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
- Wash-up: Any plastisol cleaner.
- Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed.
Written on Wednesday, 09 December 2020 15:51 in WM Plastics Be the first to comment! Read 926 times

Subscribe to this RSS feed

WM High Opacity

High Opacity HO Series
Written by Dave
High Opacity (HO) Series Ink

Applications:
- Direct printing
- Medium to dark colored garments
- 100% Cotton garments
- Cotton/Polyester, Acrylic & Polyester garments (with LB underlay)
Features:
- Low build-up
- Easily releases from the screen
- Very soft hand
- High opacity for great coverage
Non-Phthalate Plastisol Inks (Midori Series)
- High Opacity (HO) inks are formulated to be directly printed onto medium to dark colored, 100% cotton garments. These inks provide great coverage and have a creamy body unlike most High Opacity inks, therefore making the ease of printing more simple.
- Bleed Resistance: High
- Opacity: High
- Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
- Mesh: 86-240 (34 to 110 threads per cm)
- Stencil: Any direct emulsion or capillary film.
- Wet on Wet Printing: Can be printed wet-on-wet to increase production.
- Modifications: To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base (I10-1020), puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff or dulling use Suede Additive (I10-9907).
- Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
- Flashing: 700ºF for 9 seconds, just enough for the surface to be tack free.
- Squeegee Blade: Sharp.
- Fusion/Curing: 270 F / 132 C to 325 F/160 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
- Wash-up: Any plastisol cleaner.
- Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed.
Written on Sunday, 27 September 2020 14:58 in WM Plastics Be the first to comment! Read 887 times