Low Bleed Poly Colors

Applications:

  • Direct printing -Great body
  • Medium to dark colored garments -Made with non-migrating pigments
  • 100% Cotton garments
  • Cotton/polyester, 100% polyester & Nylon garments

Features:

  • Great body
  • Made with non-migrating pigments
  • Maintains viscosity during runs
  • High opacity for great coverage

Non-Phthalate Plastisol (Midori Series)

  • Low Bleed (LB) inks are formulated to be directly printed onto medium to dark colored, cotton/polyester blends,100% polyester & nylon garments. These inks provide great coverage and have a creamy body unlike most bleed resistant inks, therefore making the ease of printing more simple. Please note that tightly woven nylon garments will require a nylon additive for adhesion.
  • Bleed Resistance: Great
  • Opacity: High
  • Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
  • Mesh: 86-160 (34 to 62 threads per cm)
  • Stencil: Any direct emulsion or capillary film.
  • Wet on Wet Printing: Can be printed wet-on-wet to increase production.
  • Modifications: To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base (I10-1020), puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff or dulling use Suede Additive (I10-9907).
  • Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
  • Flashing: 700ºF for 9 seconds, just enough for the surface to be tack free.Squeegee Blade: Sharp.
  • Fusion/Curing:  260F/127C to 325F/163C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
  • Wash-up: Any plastisol cleaner.
  • Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed.
Read 456 times Last modified on Wednesday, 27 October 2021 01:13