WM Plastics All Purpose Colors

Applications:

  • Direct printing
  • White or light colored garments
  • 100% Cotton garments
  • Cotton/Polyester, Acrylic & Polyester garments (with LB underlay)

Features:

  • Low build-up
  • Easily releases from the screen
  • Very soft hand

 Non-Phthalate Plastisol (Midori Series)

  • All Purpose (AP) inks are formulated to be directly printed onto white or light colored, 100% cotton garments. AP inks can also be used on dark colored garments if an underlay is used; this is the suggested method for dark colored shirts to achieve a soft hand.
  • Bleed Resistance: None
  • Opacity: Low to Medium
  • Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
  • Mesh: 110-305 (43 to 120 threads per cm)
  • Stencil: Any direct emulsion or capillary film.
  • Wet on Wet Printing: Can be printed wet-on-wet to increase production.
    Modifications: To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base
  • Modifications: To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base (I10-1020), puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff or dulling use Suede Additive (I10-9907).
  • Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
  • Flashing: 700ºF for 3-5 seconds, just enough for the surface to be tack free.Squeegee Blade: Sharp.
  • Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
  • Wash-up: Any plastisol cleaner.
  • Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off ona white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and alwaystest on fabric to be printed.
Read 158 times Last modified on Friday, 08 April 2022 20:43